| 3/4" x 3/4" DOMESTIC GAS REGULATOR SPECIFICATION | |
|---|---|
| Body angle | 180° |
| Connection size | 3/4" × 3/4" (14 NPT male threaded according to ANSI B -1.20.1) |
| Inlet and outlet | 3/4" × 3/4"× 14 NPT male threaded according ANSI B-1.20.1Hexagonal M.S Nipples Electroplating Protection with Rubber/ Plastic cap. |
| Body material | Die-cast Aluminum Alloys. |
| Maximum allowable operating pressure | 125 PSIG |
| Normal operating inlet pressure | 50 PSIG |
| Spring pressure range | 3 to 14 w.c |
| Gas flow capacity | 70 SCFH for 0.6 Sp-Gravity Natural gas at 30 Psig inlet pressure set at 8 W.C outlet set pressure. |
| Outlet spring setting | 8 W.C |
| Lock up pressure | Not more then 1.5 W.C above the outlet set pressure of 8 W.C at 50-psig-inlet pressure. |
| Internal relief blowing Pressure | 6 to 8 W.C above outlet set pressure. |
| Diaphragm Material | Rubber compound/equivalent material. |
| Painting | Whole body Gray color with good finishing. |
| Emboss | All Regulator will be embossed as on original die cast. |